Do body protectors for horse riding work?

They determined that wearing protective vests while riding on the flat or for showjumping didn’t correlate with a decrease in injuries, but wearing a body protector for cross-country did demonstrate a correlation and showed a trend toward a lower incident severity level.

Are riding vests necessary?

An equestrian safety vest is an essential part of your horse riding protective gear along with passive or static body protectors, riding helmets, boots, and gloves. It’s recommended to wear an inflatable equestrian vest over a regular foam or padded vest for increased protection of the latter’s areas not shielded.

What is the point of vests for horseback riding?

“Air vests were specifically designed with the thought to reduce ‘crush’ injuries to the chest when riders hit the ground hard or when a horse lands on top of them during a fall.”

Should you wear a body protector when jumping?

Wearing a protector is currently only obligatory for eventing. Nevertheless, even dressage, showjumping, and leisure riders should be aware of the risks involved in riding. Wearing body protectors and back protectors when riding can reduce the risk of serious injuries to the torso.

How should a horse riding body protector fit?

At the front, the body protector should reach the breastbone at the top and cover the bottom rib at mid-chest by approximately 2.5cm, but should not cover the belly button.

Do you have to wear a body protector with an air jacket?

Air jackets are considered a top-up to your foundation garment, which should be a BETA Level 3 body protector if you event. They effectively extend the area of protection on the body, which would restrict your ability to ride if they were fully inflated all the time.

How should a body protector fit?

How to fit a Racesafe Body Protector

What is a Level 3 body protector?

Level 3 – is considered appropriate for general riding, competitions including eventing and working with horses. Level 3 body protectors should prevent minor bruising that would have produced stiffness and pain, reduce soft tissue injuries and prevent a limited number of rib fractures.

How do you wear a riding vest?

From the front, the classic style vest should cover your collarbone down to your first rib. The chest and shoulders should lie flat against your body. You will note the backside of the vest is longer. The rear of the vest should cover the base of your neck down and should stop 2-4” from your saddle when you are seated.

How long are safety vests good for?

If maintained properly, a vest that is worn on a daily basis has a service life expectancy of approximately six months. A vest not worn daily could be functional up to three years. Do not neglect washing your vest.

How do I wash my equestrian vest?

Shell and Padding

  1. Where applicable, remove the interior protective padding of the vest prior to washing.
  2. Hand wash in cold water using a mild detergent.
  3. Rinse in cold water shake and hang to dry.
  4. Do not machine wash or dry clean.
  5. Do not use bleach.
  6. Do not iron.
  7. Do not use the dryer, air dry only.

How should an XC vest fit?

Tipperary – How to Properly Fit a Riding Vest

What does a back protector do?

It’s additional protection that is installed in the motorcycle jacket and which protects our spine against impacts in the event of a fall. This back protector can be more or less soft according to the material chosen.

What do body protectors do?

The purpose of a traditional body protector is to help prevent injury to joints, bones and internal organs in the event of a riding accident when thrown from a horse or kicked. It does this by absorbing and spreading the forces involved.

Can you wear a body protector in dressage?

You are able to wear a body protector or an air jacket if you wish to, provided it is in a conservative, muted colour.

How often should you replace a body protector?

Replacing your body protector

Body protectors should be replaced every three to five years, as the impact absorption properties of the foam may decline over time. If you have a heavy fall from your horse, check your protector for dents.

How long are back protectors?

You should have approximately two to four inches between the saddle and the base of the body protector in the back. If the body protector comes in contact with the saddle, it could push upwards near your neck or interfere with your riding.

How do you measure for a riding body protector?

How to measure for a Racesafe body protector size

What is a Level 2 body protector?

Level 2 delivers the renowned levels of Jockey Vest performance whilst offering additional protection. Utilising the latest breathable foam combinations to deliver Level 2 protection at market leading weight levels. Used by jockeys & riders around the world as a blend of lightweight comfort and protection.

Do jockeys wear body protectors?

Jockeys in Britain required to wear Level 2 body protectors from October. The minimum safety requirements for jockeys’ body protectors will be increased from October 1, the BHA announced on Thursday. Following a period of industry consultation, the Level 1 model will be replaced by a Level 2 body protector.

Where are Tipperary helmets made?

Phoenix Performance, the parent of the Tipperary riding helmet’s production and design, started its work on horse riding safety over 30 years ago now. The Tipperary Sportage 8500 riding helmet is built by Phoenix, which is located on the northwest side of Toronto, Canada.

Do air vests work?

Standard vests are FAIL SAFE. They work without any external mechanisms.” What is this? Military studies examining injuries as the result of being thrown through the air show that the way the spine moves in an impact can be a predictor of injury, Ayers said.

Are air vests reusable?

The vests are designed to be used more than once. These are a high quality product. As long as there has been no damage to the air bags, the fabric or supports, and the safety mechanisms remain intact, you can reuse it as soon as you replace the CO2 cartridge.