How do I remove a motherboard connector?

To separate the connector, gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable. Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket.

Why is my 24 pin stuck?

The pins are sometimes VERY tight in there. Try pulling out, and applying force up and down so you can try to wiggle it loose. DONT be affraid to use a little force. Try it little by little with putting a thin screwdriver right between edge of plug and the adapter onboard.

Is the 24 pin connector missing pin?

The missing wire is actually normal as per the “phantom terminal” which is an unused connection on the ATX motherboard. This connection is usually on the underside of the cable so it wouldn’t be visible. This motherboard connection was removed many years ago so there is no pin in the slot.

Does the 24 pin connector click?

The click is from latch in the middle of the cable connector sliding over the hook like piece of plastic on the motherboard connector. The two plastic pieces don’t actually do anything other than hold the pieces together, the connection is between the 24 metal male and female parts and they don’t click.

How do you remove a multi pin connector?

How to remove a multi-pin connector using a solder pot.

How do I remove a push pin connector?

Remove Pins From Amphenol / Molex Connectors For Reuse (4K)

How do you jump a 24 pin power supply?

How To Jump Start A Power Supply (PSU)

Do I need to connect both 24 pin and 4 pin?

Yes, you do need to connect both cables.

How do you put a 24 pin on a motherboard?

ATX 24 Pin Plug and Play Video

Can a CPU still work with missing pins?

Occasionally, a CPU may even work without all the pins – but this is a very rare situation that occurs when redundant ground pins are removed.

What is the 24 pin power connector called?

The ATX 24-pin power supply connector is the standard motherboard power connector in computers today. The connector itself is a Molex 39-01-2240 connector, often called a Molex Mini-fit Jr.

What is the 24 pin connector on a motherboard for?

A P1 24 pin or ATX 24 power connecter is the standard motherboard connector. The P1 24 pin is made of Molex 39-01-2240 connector. These connectors main use was to provide extra power to PCIe cards, and have more than one power wire. The four extra pins it has are lines for higher current capacity.

What are the colors of the wires that go into a 24 pin connector?

Template:ATX power connector

Purple+5 V standby21
Yellow+12 V22
Yellow+12 V23
Orange+3.3 V24

Does the 24 pin connector power the CPU?

The 20/24 pin ATX provides primary power to the system. It powers all directly connected components and SMDs, and provides power to PCI-E devices.

What connects to a 24 pin connector?

Almost all of the new power supplies used today feature a 24-pin power connector to connect to a computer motherboard. However, some motherboards still feature a 20-pin ATX power connection.

How do I remove pins from my ATX connector?

How To Use ATX Power Supply Pin Removal & Extraction …

How do you remove a stubborn electrical connector?

How to Get Frozen Auto Electrical Plugs Apart w/out Breaking Them

How do you remove a micro connector?

Micro Rc Connectors – How to remove and swap leads

How do you release a push connector?

How To Release Wires From Outlet Push In Connectors

How do you release a push fit electrical connector?

IDEAL In-Sure Push-In Wire Connectors HOW TO REMOVE WIRE

How do you remove a harness connector?

Removing a terminal from a connector

How do you raise a 24 volt system with a 12 volt?


  1. Two or more 12-volt batteries wired in parallel—positive to positive, negative to negative—is still a 12-volt system.
  2. Two or more 12-volt batteries wired in series—the positive terminal of one battery connected to the negative terminal of a second battery—develops 24 volts, but amperage doesn’t change.

How do I test my 24 pin power supply?


  1. Shut off your PSU.
  2. Unplug all cables from the PSU except for the main AC cable and the 24-pin cable.
  3. Locate pin 16 and pin 17 on your 24-pin cable.
  4. Bend your paper clip so the ends can be inserted into pin 16 and pin 17.
  5. Turn on the PSU.
  6. See if the PSU fan turns.

How do you turn on a motherboard with a screwdriver?

Lightly touch a metal screwdriver to the two power switch header pins, and the system will turn on if everything is connected correctly. This process accomplishes the same thing as hitting the power button on your case when properly connected, or using an onboard power button on your motherboard.

Do you need all 24 pins for motherboard?

ATX 24-Pin Power Connector

The 24-pin connector is arguably the most important as it provides your entire motherboard with all the power it needs so as to function properly. Older motherboards required a 20-pin connector whereas newer ones need an additional four pins.

How many volts is a 24-pin connector?

This connector has separate wires which supply voltages of 3.3 volts, 5 volts, and 12 volts. A 24-pin power supply adds an extra line each of 3.3 volts, 5 volts, and 12 volts, as well as an additional ground. These extra lines are used to satisfy the needs of newer technologies and more power-hungry peripherals.

Does every motherboard have a 24-pin?

Because older (or lower-spec) motherboards had a 20-pin connector, and newer (or higher-spec) motherboards needed the 24-pin connector.

Is ATX 20 or 24 pin?

An ATX power supply provides a number of peripheral power connectors, and (in modern systems) two connectors for the motherboard: a 4-pin auxiliary connector providing additional power to the CPU, and a main 24-pin power supply connector, an extension of the original 20-pin version.

How do you remove a port connector?

How To Remove Broken Port Connector

How do I remove PCI connector?

On the front of the PCI Express slot, there’s usually a tab holds the front of the card in place. Gently press this tab and hold it in place while you are removing the card. Grab the top edge of the expansion card and pull up.

How do I remove an electrical connector?

How to remove a wire from a push-in clear plastic connector in a can light

How do you remove a connector block?

How to remove tabbed terminals from a connector block