How much does it cost to build an outdoor arena?

Costs vary based on the size of the arena, as well as the materials used. “It can range from $25,000 to upwards of $200,000 or more,” says Keller. “It depends on how in-depth you want to get, and whether this is a commercial operation or your own farm,” says Keller.

What is the average size of a horse arena?

According to experts, the minimum dimensions for an average horse arena should be no less than 60′ in width and interior heights ranging from 16′ to 18′ measuring ground up to the peak of the trusses. The recommended horse arena sizes are as follows: 80′ wide x 200′ long and 60′ wide by 120′ long.

How do you start a horse arena?

Building our DIY Horse Arena at the Ranch, From Scratch

How do you make an outdoor horse arena?

Building A Horse Arena (part 1)

How many tons of sand do you need for a horse arena?

You need 96 tons for an average depth of 2 inches, You will need 144 tons for a 3 inch average depth.

How much does it cost to build a small arena?

Cost to Build Riding Arena by Size

The cost to build a riding arena ranges from $50,000 to $500,000 for smaller sizes appropriate for dressage, compared to $100,000 to $1,000,000 for larger spaces.

Do you need planning permission for riding arena?

Planning permission is required for permanent stables and field shelters, horse walkers, arenas (both outdoor and indoor), concrete hardstanding and new roads and accesses. It is advisable to contact Equus for advice if you are unsure.

How deep should a horse arena be?

Typically when we quote customers with our dust-free footing, we start with a minimum depth of 3.5 inches. This depth is great for ground work, walk trot canter, and dressage. If there is any jumping happening in the arena, we bump the depth up to 4 inches. The 4 inches is only recommended for lower level jumping.

How deep should the sand be in a horse arena?

Be careful to apply the proper depth of sand. With its deep, loose traction, sand deeper than 6 inches is stressful to horse tendons. Start with about 2 inches and add a ½ inch at a time as necessary. (Start with only 1½ inches for arenas used primarily for driving horses.)

What is the best surface for a horse arena?

Sand is a great choice for horse arenas because it can be combined with topsoil, wood chips, rubber, and other materials to create the ideal surface. For example, topsoil or wood can be combined with our sand to improve moisture retention. Rubber can be added to increase padding for horse hooves.

What is a good size for an outdoor riding arena?

Size. The most popular arena size is 40x20m, while those dedicated to dressage may opt for a 60x20m layout. For jumping arenas, extra width is recommended. “Even 40x25m makes a difference to where you can site jumps, so I always advise people to go for the extra five metres if they can,” says Steve.

How much does sand cost for a riding arena?

Sand. To get decent footing for your arena, you can expect to spend around $1 to $2 per square foot. Sand footing is probably the most common and diverse of these materials and most arenas are going to have some sand included in their footing composition.

What is the smallest size for an outdoor riding arena?

Therefore, the absolutely smallest useable size for an outdoor arena set in an open area is 21×41 meters, and for an indoor arena with walls or fences, 23×43 meters.

What is the average size indoor riding arena?

The most common indoor horse riding arena sizes are: the 60′ wide x 120′ long and the 80′ wide by 200′ long. It’s important to have a clear-span structure meaning no posts or beams inside the arena’s riding areas. If you’ll be riding in groups or training, a longer indoor arena is advisable.

How do you make a cheap dressage arena?


What is the best arena footing?

What is the best arena footing?

  • Sand Footing – Sand is an old and reliable favorite.
  • Wood Footing– Your options with wooden footing are more plentiful than one might imagine.
  • Dirt Footing– Depending on location, dirt footing may be the cheapest and most convenient type of arena footing.

How much arena footing do I need?

The depth of arena footing sand depends on the sand quality and the riding discipline. Usually, 3-4 inches of a fine sand is used for dressage and jumping arenas with a geotextile sand additive. For plain sand arenas, 2-3 inches of a fine sand is recommended.

How do you calculate sand for Arena?

How much sand do I need?

  1. Determine the length and width of the cuboidal excavation.
  2. Calculate the area of the excavation by multiplying the length by the width.
  3. Establish the depth of the excavation.
  4. Multiply the area by the depth of the excavation to obtain its volume: 36 * 0.5 = 18 cu yd .

How big does a barrel racing arena need to be?

Barrel Racing Arena Arenas

A minimum of 15′ between barrels one and two and the side fence (20′ standard) A minimum of 30′ between barrel three and the back fence. A minimum of 30′ between the time line (start/finish line) and the first barrel (60′ standard)

How much does it cost to build an indoor riding arena Canada?

How much does an indoor riding arena cost? Indoor riding arena building kits start at approximately $80,500 for a small 70×30 dressage arena and climb to around $330,400 for a large 130×330 horse jumping arena. You will also need to factor in construction at between $5 and $10 per square foot.

How much does it cost to build a horse barn?

Approximate Metal Barn Costs

# StallsDimensionsBarn Cost From:
2 stall barn30×40$15,000
6 stall barn40×60$24,500
10 stall barn40×90$36,800
12 stall barn40×100$41,000

Can you build a house on equestrian land?

Can you live on equestrian land? Yes, however planning permission is required for a permanent property featuring equestrian benefits such as stables, an arena and/or field shelters.

Can I build stables without planning permission?

Generally, if you want to build stables on your property, you will need planning permission from your Local Planning Authority (LPA). However, the laws are rather complex and there are exceptions for private leisure stables.

How do you make a lunge pen?

How to Build a Round Pen

What kind of dirt do horse arenas need?

Clay-based soil is ideal if it is leveled and compacted. Clay may need to be brought in to provide a good subbase if the regional soil is too sandy or silty. Putting a slight crown on the subbase (raising the center an inch or two and sloping toward the sides) will help water drain away from the arena.

Is Mason sand good for horse arena?

This is a great option to start out with for dressage and jumping horses, particularly if you intend to optimize the footing with a textile additive like TruTex. In some cases, a well balanced concrete sand can work but typically, mason sand is easier to stabilize.

Is River sand good for horse arena?

Some sand particles, such as beach and river sand, are extremely round. On the other hand, some sand, such as quartz sand from a quarry, is more angular and sharp. Both can be useful, as angular sand provides more stability while the round sand provides more cushioning.

How do you maintain a horse arena?

Arena Maintenance Goals

  1. Keep sand particles and footing products mixed.
  2. Loosen a compact surface.
  3. Tighten a loose surface.
  4. Level out the surface – divots, deep/shallow spots, hard spots, etc.
  5. Eliminate ruts in high traffic areas.
  6. Pull in migrating materials.
  7. Minimize dust and promote drainage.