Front of the Tivo box
Turns the TiVo box on or puts it into standby. The green light indicates that the box is on. The red light indicated that the box is in standby.
Is there a reset button on a TiVo box?
To do this: Press Home on your remote. Select Help & Settings. Select Clear or reset TiVo box.
Why is my TiVo not recording my shows?
Here are some reasons why a show may not have recorded: When OnePass recordings and other repeating recordings conflict, shows are recorded according to their priority in the OnePass Manager. If the show was a rerun, your OnePass recording may be set to record First Run Only shows.
Why is my TiVo not working?
Check that all your cables are securely connected.
Also, check that the coax connection from your modem to the wall is secure. Good to know: If you’ve moved your TiVo box to a new outlet recently and it’s no longer connecting, the outlet may not be connected to your TiVo network.
How do I fix the red light on my virgin box?
White power light is on and internet light is flashing red
This means the Hub needs a reboot. Switch the Hub’s power supply off at the wall, then switch it back on again.
How do I fix my Virgin Media red light?
Re: red light on virgin media hub
Try a 30 second pinhole reset of the hub with no ethernet connection. If it’s still red then you need a replacement hub via a VM engineer. You can call it in on 0345-454-1111 or else wait for the forum team.
Why is my Virgin TiVo box not working?
Check that all the cables connect firmly into the TV box and your TV. Make sure the power button on the TV box is switched to ‘1’ or ‘on’ If the TV box feels hot, let it cool down completely, and remove anything that’s placed on top of the box or covering the vents.
How do I reboot my box?
Reboots will often solve issues by resetting the box and its cable connection. To reboot, unplug the cable box from the power, either from the back of the box or from the power outlet on your wall or power strip, for approximately 30 seconds, and then plug it back in. This will begin the boot-up process.
Why is my Virgin box not recording?
2 things to check, 1st one pause some live TV and then carry on watching without any problems and rewind and fast forward it to check your hard drive is ok. 2nd one is make sure your box is set to fast start or active start, Home, Settings, System, Standby power consumption.
What do I do if my DVR is not recording?
- Make sure your equipment (TV and cable) is properly connected and powered on.
- Make sure the coax cable is connected to the outlet.
- Remove any objects around your receiver to allow proper ventilation.
- Refresh your receiver.
- Unplug your receiver and wait at least 60 seconds before plugging it back in.
How do I refresh my TiVo box?
Resetting your TiVo Devices
How do I reset my TiVo DVR?
To restart the TiVo BOLT, go to TiVo Central screen and select ‘Settings & Messages,’ then ‘Help,’ and choose ‘Restart TiVo box. ‘ To restart the TiVo Roamio/Mini, go to TiVo Central screen and select ‘Settings & Messages,’ then ‘Help,’ then ‘Restart or Reset. ‘ Then select ‘Restart the TiVo box.
How do you restart a frozen TiVo?
Unplug the network adapter or Ethernet cable from the back of the TiVo device, and then disconnect the power cord. Wait 15 seconds, and then connect the power cord again. You should see the ‘Welcome. Powering up… ‘ screen and your system will restart within a few minutes.
Why do I have to keep rebooting my TiVo box?
A drive that reboots once every few months is probably nothing to worry about. Like all software, the TiVo may just be encountering rare bugs on occassion. But rebooting more frequently is a cause for concern, and is generally a good indication that the hard drive in the TiVo needs to be replaced.
Where is reset button on TiVo remote?
- Hold down the TiVo + TV Power buttons until the activity indicator flashes red.
- Press Thumbs Down three times, then press Enter.
- The activity indicator will flash red three times if the global reset is successful.
What Colour should the light be on my virgin box?
The light functions are described below: Initial power on – side lights, all green, wireless button – red and blue together, LAN sockets – all blue. Self-test – WAN light – will blink slowly (green),WPS (Wireless Protected Set-up) light – will blink slowly (blue).
What does red broadband light mean?
The red light is meant to signal that there are issues with the internet or connection, but there’s usually a quick fix.
Should TV be on or off when rebooting cable box?
For Spectrum Receivers, models 101/201/110/210:
Make sure your TV is on. Press and hold the Reset button for a full five seconds, then release.
How long does it take a cable box to reboot?
In most cases, your TV Box should reset in 15 minutes. In some cases, the program guide or other services may take 45 minutes before they are available.
How do you reboot your TV?
Turn off the TV. Unplug the television power cord (mains lead) from the electrical outlet. Let the television remain without power for 2 minutes. Plug the power cord (mains lead) back into the electrical outlet.
What does flashing light on Virgin box mean?
This should flash when the Hub powers-up, it then stays green for a couple minutes before tuning off completely. It may also flash green when the Hub is performing a software update.
Should I turn my virgin box off at night?
All of VM’s TV boxes are designed to be left connected 24/7/365, and updates are often pushed out overnight. Repeated on/off cycles are likely to cause problems sooner or later.
What is the difference between a Virgin V6 box and a TiVo box?
The Virgin TV V6 box, powered by TiVo, is Virgin Media’s smallest, smartest and fastest box yet. It is half the size of Virgin Media’s previous TiVo box with 10x the power and packed with a load of extra features.
What does red modem light mean?
When you see a red light on your modem, it typically means your modem doesn’t detect an internet signal and can’t connect. Red can be used to indicate a device is on, but it isn’t a color you generally want to see on your modem.
How do I get my TiVo box out of standby mode?
To return to normal mode from Standby, press the TiVo button – at the top of your remote control – or the LIVE TV button – on the right of the TiVo button. You can choose from several levels of power saving when your device enters Standby.
What does red power light on modem mean?
Power light RED: The modem is testing its own hardware. If it’s still red after a few minutes, there could be hardware or sofware failure. Power light ORANGE or blinking GREEN/ORANGE: The modem is testing its own software.
Does a flashing red light mean recording?
A red blinking light on a security camera can indicate that the camera is recording, but this will vary between models. Blinking red lights on IP cameras commonly means that the security camera is attempting to connect to a paired device, for instance.