What kind of concrete should I use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.

What kind of concrete should I use for setting posts?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

Should I use concrete or cement for fence posts?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

Is rapid set concrete as strong as normal concrete?

Fast-setting concrete isn’t just simple and fast, it’s also durable and strong, reaching 4000 psi — or pounds of force per square inch —after a month. That’s stronger than the concrete used for foundations on most homes.

Which quikrete is best for fence post?

Overall, the 50lb Quikrete Fast Setting Concrete Mix is what I found works best for installing a fence post. It’s easy to work with, sets fast, and is very strong.

Is rapid set concrete good for fence posts?

Rapid Set Concrete is ideal for house jobs like setting pergola and fence posts, whereas Quick Set Concrete is a great choice for fence corners and structural supports where higher compressive strength is required.

Can you use normal cement for fence posts?

3 Answers. Show activity on this post. If the setting time is not an issue, you can certainly use normal quickcrete – or save even more money by purchasing cement and aggregate (sand/gravel/rock) and really making use of the mixer. Standard concrete mixing practice is to mix the dry materials and then add water.

How many bags of quikrete do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

How much concrete do I need for a 4×4 fence post?

For example: A 6′ high fence post 4″x4″ needs a hole 12″ in diameter by about 2′ to 3′ deep. That would take four 50 lb. bags of fast setting concrete mix per fence post.

Is 2 feet deep enough for fence posts?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How do you keep fence posts from rotting in concrete?

Fill the first three inches up with gravel so the end of the post doesn’t come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.

How deep should a 7 foot fence post be?

How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

Can I use regular Quikrete for fence posts?

How to Set Posts in Concrete (without mixing)

Is Sakrete or Quikrete better?

When you compare the two, there’s not a whole lot of difference in their composition. Even though Sakrete and Quikrete may vary in the materials they’re made up of, sometimes the packaging companies who package the concrete mixtures for Sakrete and Quikrete will use the same materials for both kinds of mixes.

What is the difference between Quikrete and concrete?

Quikrete is concrete. They’re both primarily sand, cement and aggregate stone. The only difference is that Quikrete has some additional ingredients and slight different ratios that make it set up faster. But it’s still concrete.

Do you have to use water with quikrete?

Whether you are building a new fence, setting a mailbox or anchoring a basketball goal or play set, QUIKRETE® Fast-Setting Concrete is the ideal product for the job. With Fast-Setting Concrete there is no mixing or tools required – You simply pour the dry mix right from the bag into the hole, then add water.

How many bags of concrete do I need for a post hole?

Complete calculation:

For reference, a 40-pound bag of concrete typically yields about 0.3 cubic feet, a 50-pound bag yields 0.37 cubic feet, a 60-pound bag yields 0.45 cubic feet, and an 80-pound bag yields 0.6 feet. This means that in the example above, each post would require about eight 50-pound bags.

Whats the difference between cement and concrete?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

How much concrete do I mix per fence post?

Generally, for each fence post, you will need enough cement to fill a hole that is a third to half as deep as the post’s above-ground height and three times as wide (in diameter) as the actual post. That leaves you with the job of measuring out the fence posts so that you know how large each post hole should be.

How long should concrete set for fence post?

Typically, you can apply some weight to the posts after 4 hours, but it’s a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.

How deep should a 3 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Is concrete better than Postcrete?

Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.

Can you use Portland cement for fence posts?

If you must use portland, instead of the just add water type, the mix ratio is 1-2-3. 1 shovel portland, 2 shovels sand, 3 shovels gravel. I add a little Portland cement to sackcrete for a large gate and it works fine, smaller or light weight I just use the bag.

Should I mix Postcrete?

No mixing is required. For best results follow these instructions: 1) Dig hole to correct depth and width relevant to post size (see table on reverse). 2) Fill hole with water to a third of the depth. 3) Pour in Postcrete evenly around post until no standing water is visible (powder completely covers water surface).

What is a good distance between fence posts?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

How big of a hole do you need for a 4×4 post?

A general rule of thumb is to dig the diameter of the hole at least 3-4 times the diameter of the post. For example, if setting 4 x 4 wood posts, dig holes 9-12″ in diameter.

How do you use quikrete to post?

Watch this before you use Quikrete to set a post!! No mix concrete.

Should pressure treated posts be set in concrete?

With pressure-treated posts, the rot will be slow. We have three ways to solve the rotten post problem. First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel. Concrete should be poured around the post – no concrete under the post.

Is it better to screw or nail a fence?

Nails are faster than screws to install, meaning less labor for you or your builder (which may translate into lower installation cost). However, nails are more likely than screws to grow loose over time. Screws, on the other hand, secure the fence better than nails.

How deep should a concrete fence post be?

Dig your hole to the correct depth, allowing for the height of the fence panel and the gravel board. As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole.