Drill a 3/4-inch hole in the outline. Install an all-purpose keyhole-style blade on a reciprocating saw, insert the blade through the hole and cut around the outline. You can also make the cut with a jigsaw and an all-purpose wood-cutting blade.
What is the diameter of a standard toilet flange?
Standard 4 x 3-Inch Toilet Flanges
The most common and readily available toilet flange is the 4 x 3-inch size. This pipe is 4 inches wide at the top but only 3 inches wide at the bottom. The 3-inch bottom is the correct size for fitting the schedule 40 pipe most frequently used in home drains.
How big is the hole for the toilet?
The standard size for the hole is 4 1/2 inches in diameter. The hole in the rear wall of most toilets is 12 inches from where the toilet will sit.
Are all toilet holes the same size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Toilet bowl shapes: Round toilet bowls take up less room than elongated bowls, which are usually up to three inches longer.
How do you cut a subfloor around a toilet flange?
How to Fix a Toilet – Wooden Sub-Flooring Flange Repair – Part 3 …
Does a toilet flange need to be screwed to the floor?
Closet (toilet) flanges must be 1/4″ above a finished floor. This is so the wax ring seals properly to the flange and the hub on the toilet. If a proper seal is not achieved it will result in leaking. If the flange is lower than or flush with the floor they make foam rings that cover the distance for a proper seal.
Does toilet flange go inside pipe?
This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. Leave the old toilet flange right in place and glue on the new one at the right elevation for the floor, if it’s plastic. The flange should be sitting with the bottom edge flush with the top of the floor.
Do all toilets fit the same flange?
As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don’t project out as much as elongated, and then there are variations within the round and elongated categories as well.
How thick is a toilet flange?
Wax rings come in two diameters, 3 inches and 4 inches, because — as you might expect — those are the two standard sizes for toilet waste openings. Besides diameter, thickness is also an important parameter when it comes to wax rings.
What does 12 inch rough in mean for toilets?
12-inch Rough-in Toilet. If you’re not familiar with the term “rough-in,” the experts at PlumbersStock explain that it’s the location where the water outlet is (in most cases) beneath the toilet. The actual rough-in measurement is the distance between the center of this outlet to the wall facing the back of your toilet …
How far should toilet flange be above finished floor?
With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
Are toilet tank holes standard?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
How far does a toilet stick out from the wall?
In general, round-front toilets extend 25 to 28 inches from the wall. Elongated toilets extend 29 to 31 inches.
Can you replace a 10 inch rough in toilet with a 12 inch?
Ideally, the toilet’s rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.
What happens if the toilet flange is lower than the floor?
Toilet Flange Too Low – Great Solution! – YouTube
Does toilet flange go on top of tile?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.
How is a toilet flange secured to the floor?
How to Replace a Toilet Flange | Toilet Repair | The Home Depot
Should you caulk around toilet flange?
Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
How tight should toilet floor bolts be?
Bolts Don’t Have to Be Extremely Tight
In some cases, hand-tightening and a quarter-turn is all you need. It’s important to keep in mind that the toilet tank is not intended to take weight and strain. The tank-to-bowl bolts are merely there to ensure the rubber seal between the tank and bowl is snug and leakproof.
What screws to use for a toilet flange?
If no hardware was provided, use wood screws or cement screws, depending on your subfloor material. Slide the toilet flange bolts into the new flange. Secure them with washers and nuts.
Should a toilet be caulked to the floor?
Caulk Keeps the Toilet Secure
Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?
Can you put 2 wax rings on a toilet?
You can certainly install a toilet with multiple wax rings, in fact sometimes it is necessary to make sure you don’t have a leak. The most common case is when a homeowner will install a tile floor (or really any thick floor).
Do you glue a PVC toilet flange?
How to Install a P.V.C. Toilet Flange – YouTube
How do you measure a toilet flange?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall. Don’t measure from the base molding! Take this measurement from the finished wall.
Does toilet flange size matter?
Most drain pipes are 3 inches in diameter, while older homes may have larger pipes that are 4 inches in diameter. To correspond with the drain pipes, flanges are also available in 3- and 4-inch diameters. The hole should be large enough to fit the flange. In most cases, 4 inches in diameter will be adequate.
What is the difference between a cheap and expensive toilet?
The more expensive ones have a better glaze inside. The cheaper ones don’t stay clean looking beyond the first flush. The cheaper ones require a couple of flushes to get everything down. The lid also doesn’t fit on the cheaper ones very well.
Do I need wax ring with flange?
The flange helps to ensure that the ring is centered over the flange in the floor and to direct the waste into the pipe. More wax in the ring helps ensure a good and thick seal. That’s not good advice. If you use extra wax where not needed it can squeeze into the path of the water.
Should you put the wax ring on the toilet or the flange?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
