Razer Basilisk X Hyperspeed
Switch the slider to Bluetooth mode. Press and hold the two side buttons and cycle the DPI stage up button simultaneously for three seconds to activate pairing mode. The status indicator will blink twice in repeated intervals to show that the device is in pairing mode.
How do I reset my Razer basilisk mouse?
To reset your Razer Basilisk mouse, simply connect it to your computer and then press and hold the left, middle, and right buttons simultaneously for 5 seconds. This will reset the mouse to its default settings.
How do I setup my Razer Basilisk X HyperSpeed?
How to Bluetooth pair the Razer Basilisk X HyperSpeed
Why won t my Bluetooth Razer mouse connect?
Ensure the device is properly plugged in and connected directly to the computer and not through a USB hub. Clean reinstall your Razer Synapse 2.0 if the issue persists. Remove old drivers from the Device Manager.
How do I resync my Bluetooth mouse?
Right-click on Start, and select Device Manager. In Device Manager, click the arrow next to Bluetooth, and select the Bluetooth radio. Right-click the Bluetooth radio and select Properties. Select the Power Management tab, and see if there is a check next to Allow the computer to turn off this device to save power.
Can you factory reset a Razer mouse?
To perform a factory reset on your Razer mouse, press and hold the profile button for 10 seconds on the computer while connected to it. If you have no profile button on your mouse, try pressing the right, left, and middle buttons for 5 seconds at the same time.
Why is my Razer mouse unresponsive?
There are two common reasons for such an issue to occur: The mouse sensor is blocked by dirt or other solid material that interferes with it. The mouse needs to reset its surface calibration.
How do I fix my Razer mouse not working?
Unplug your Razer mouse from your computer. Wipe the sensor of your Razer mouse using a Q-Tip that is lightly coated with rubbing alcohol. Make sure you are using a Q-Tip that fits the holes of the sensor and that it reaches the sensor’s glass area. Once done, let this dry completely and try the Razer mouse again.
How do I fix my Razer mouse not turning on?
My Razer wireless mouse will not power up or turn on
- Make sure the switch on the bottom of the mouse is in the “off” position.
- Charge if for 30 minutes.
- Unplug and re-plug your mouse.
Why isn t my Razer Basilisk not working?
My Razer mouse is not working properly
Clean the mouse using a microfiber cloth that is lightly coated with rubbing alcohol. Plug the device directly to the PC and not a USB hub. Update the drivers on your Razer device. Update Razer Synapse.
Why is my Razer basilisk blinking?
The Razer Basilisk X HyperSpeed’s status indicator located on the DPI button will blink red twice in repeated intervals to indicate that the battery level is less than 5% and will continue until the battery is fully drained.
What does the button on the bottom of the Razer basilisk do?
Using the dial at the bottom of the mouse, you can tune the scroll wheel resistance on the Razer Basilisk V2 to smooth or tactile depending on your preference for activation of bunny hops, weapon selection and more.
Why is my mouse not pairing?
Make sure your mouse or keyboard is paired with your PC
Press and hold the pairing button on your mouse or keyboard for 5-7 seconds, then let the button go. The light will blink to show that the mouse is discoverable. The pairing button is usually on the bottom of the mouse.
Why is my mouse paired but not working?
Your mouse may be connecting to another device nearby. Your mouse no longer remembers the pairing. There is a problem with your computer/devices Bluetooth adapter. Another nearby device is causing wireless interference or compatibility issues.
Why is my mouse connecting but not working?
First, try checking your hardware
Unplug USB cables and wait for a little while for the device driver to be unloaded by Windows, and then plug the device back in. Try using a different USB port on your PC. If you use a USB hub between the device and the PC, make sure the hub has power.
Why is my wireless mouse not working even with new batteries?
The batteries that you are using are low in power. The receiver is plugged into a port that is not working. The wireless device that you are using has trouble synchronizing with the receiver. There may be interference from other wireless devices.
Why is my Bluetooth mouse not moving?
Check that the battery of the mouse is charged. Make sure that the receiver (dongle) is firmly plugged in to the computer. If your mouse and receiver can operate on different radio channels, make sure that they are both set to the same channel.
How do I get my computer to recognize my Bluetooth mouse?
How to connect the Bluetooth device to the computer
- Press and hold the Connect button on the bottom of the mouse.
- On the computer, open the Bluetooth software.
- Click the Devices tab, and then click Add.
- Follow the instructions that appear on the screen.
How do I do a hard reset on my mouse?
To reset a computer mouse:
- Unplug the mouse.
- With the mouse unplugged, hold down the left and right mouse buttons.
- While holding down the mouse buttons, plug the mouse back into the computer.
- After around 5 seconds, release the buttons. You will see an LED flash if it resets successfully.
How do I force restart my Razer?
How to perform a hard reset on the Razer Phone
- Press and hold the Power and the Volume Up buttons simultaneously for 7-10 seconds. The Phone should reboot automatically.
- Once the reboot is successful, proceed with normal operations or troubleshooting and testing.
Does Razer do repairs out of warranty?
OUT-OF-WARRANTY REPAIR
Repaired and shipped within 5 business days from when repair fee is received. ONLY applicable for Razer laptops.
Why is my mouse not working all of a sudden?
Check on the Power Source
Like any other peripheral, a mouse needs power. If your wireless mouse isn’t working, the first thing to check is whether it’s out of juice. For battery-powered ones, open up the battery bay of your mouse and swap in some fresh batteries to see if that resolves things.
How do I wake up my Razer mouse?
Right-click on your Mouse then choose “Properties”. Click the “Hardware” tab then click “Properties”. Click “Change Settings”. Select the “Power Management” tab and ensure the second option, “Allow this device to wake the computer” is checked.
How do I reset my Bluetooth mouse receiver?
Reset your wireless computer mouse
- Turn off your wireless mouse.
- Hold down the left and right mouse buttons.
- While holding down the mouse buttons, turn the mouse back on.
- After around 5 seconds, release the buttons. You will see an LED flash if it resets successfully.
How do I reset my Razer settings?
Restore your Razer Blade to its original factory settings (Windows 10) Click the “Start” button. Go to Settings > Update & security > Recovery. Click on the “Get started” button under “Reset this PC”.
How do I use hyperspeed multi device pairing?
Step-by-step process
- Launch Razer Synapse 3.
- Go to your device’s profile.
- Update your device to the latest firmware.
- Click on “Open Pairing Utility”.
- Click the “ADD” button to start scanning for a device.
- Set the compatible device switch to Hyperspeed (2.4G) mode.
- Click “PAIR” once the device is found.
